Ra70 Ra80 150W Dimmable LED Linear High Bay Light With Motion Sensor

Guides to Choose the Best LED High Bay Light for Parking Lot

When you are looking at LED high bay lights for your parking lot, you need to consider various things apart from design and size. The more particular that you are with your choice, the more would be your chances of getting the best LED high-bay fixture for your lighting requirements. Here is a guide on LED high-bay lights for parking areas that will help you to make the best choice.


The wattage determines the illumination output that you can obtain ultimately. The LED chip brand has a direct impact on the brightness, while the color of LED impacts the output of light. The quality and type of materials also has an impact on the brightness, given that there are varied light outputs from varied LED bulbs at the same wattage on the basis of differences in manufacturing. Varied wattage is ideal for varied settings.


The measure of the entire light output emitted by a light source, like LED parking lot light, comes with differing brightness. There could be varying lumens from two LED area lights that have similar wattage. If you want to find out which is the brighter bulb, you have to use lumens as your parameter rather than wattage. Pick lighting solutions with appropriate lumens to be able to achieve the best light intensity for the results that you desire from your light.

Beam angles

A 120 ° beam angle is used by LED strip lighting and LED bulbs. However, when you are going for LED high bay lights for your parking area, you need to consider which beam angles would be the most appropriate. For example, a beam angle of 60 ° can be ideal for spaces with ceilings that have about 10-feet high ceilings. On the other hand, ceilings that are more than 15 feet high can be served the best by a beam angle of 24 – 30 °.

Pole Placement

Parking lot layouts are quite varied, but almost every parking lot light fixture is affixed to a tall pole. This is because high areas serve as a vantage point, and lights can pool more easily all through the spot. After you decide to switch your present light fixtures out and opt for LED high bay fixture, you need to decide whether you would like to keep the existing pole or replace them. Given that LED fixtures offer more light and you can customize the distribution of light, it will be possible for you to get better or same results with less number of lighting fixtures. It means that you will not require as many poles, and also need to decide whether or not to leave poles that do not comprise of lighting fixtures or get rid of them.

Light characteristics

You also need to take into account many of the characteristics of the lights, such as Color Rendering Index (CRI), Correlated Color Temperature (CCT), earned safety ratings, Eco-friendliness, heat distribution properties and light distribution properties. It is necessary to consider these to know which high-bay lights can be the most suitable for your parking lot.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *